Skip to content
White Bottle · Packaging

Supplement packaging, explained: bottles, pouches and blisters

The package is half the product: it protects the formula, carries the label and sets the freight bill. Here is a plain-language guide to the three formats founders ask us about most, from the team that fills and seals them every day.

For U.S. dietary-supplement projects · More founder guides

The short answer: most supplement products ship in one of three formats: rigid bottles (usually HDPE, sometimes PET or glass), flexible stand-up pouches, or unit-dose blisters (Alu-PVC or Alu-Alu). The right choice comes from the formula’s sensitivity to moisture, light and oxygen, the look you want on shelf, and the cost per unit. Pick the format on purpose and get the material spec in writing.

Bottles: PET vs HDPE vs glass

The classic supplement bottle is rigid plastic, and the two plastics that dominate are PET and HDPE. They look different because they are different.

Clear

PET (polyethylene terephthalate)

The clear, glossy plastic behind beverage bottles. Rigid and transparent, with a good oil and solvent barrier and a fair water barrier. [1]

Use it when: you want the product visible on shelf (colorful gummies, powders with visual appeal) and the formula is not light-sensitive.

Opaque

HDPE (high-density polyethylene)

The milky, opaque plastic behind the standard white supplement bottle. Good impact strength, good moisture protection for the price, and it blocks light by being opaque. [1]

Use it when: protection and cost matter more than see-through looks, which is most powder and capsule projects.

Premium

Glass

Essentially impermeable to gases and moisture, chemically inert, and premium in the hand. The trade-offs: heavy, breakable, more expensive to ship, and fewer high-speed line options.

Use it when: the positioning or the formula genuinely justifies it. For everyday products, plastic wins on cost and freight.

Whatever the bottle, the closure system does half the work: most supplement bottles carry an induction-sealed liner under the cap (heat-bonded at the line, it keeps the product sealed and tamper-evident until opened) [2], and a desiccant packet or canister goes inside when the formula is moisture-sensitive. Child-resistant closures are available where the product or market calls for them.

Stand-up pouches and their layers

A stand-up pouch is not one material: it is a laminate, a stack of thin layers each doing a job. A typical structure:

  • Outer layer (often PET): carries the print and gives the pouch stiffness and scuff resistance.
  • Barrier layer (metallized PET or aluminum foil): the layer that actually keeps moisture, oxygen and light out. This is the spec to ask about first.
  • Inner sealant layer (often LLDPE): heat-seals the pouch shut and touches the product.

Brands pick pouches for shelf presence, low freight weight and a lower packaging cost per unit at volume. The trade-offs: no rigid protection (a pouch can be dented or punctured), resealing depends on the zipper, and scooping from a pouch is a different customer experience than a jar. The full layer stack, thickness and zipper type are specification items you can get in writing from the supplier.

Blisters: Alu-PVC vs Alu-Alu

Blisters pack each capsule or tablet in its own sealed cavity: unit-dose, portable and tamper-evident. The naming tells you the materials.

Visible product

Alu-PVC (thermoform)

A transparent PVC cavity, formed with heat, sealed with aluminum push-through lidding. The customer sees every capsule, the tooling is standard, and the cost is the lowest of the blister options. The moisture barrier is moderate: fine for stable formulas.

Use it when: the product is not highly moisture-sensitive and seeing the capsule helps the brand.

Maximum barrier

Alu-Alu (cold-formed foil)

An aluminum-based laminate on both sides (typically an OPA/aluminum/PVC structure), pressed into shape cold rather than thermoformed. Opaque, and the highest barrier against moisture, oxygen and light available in a blister. The cost is roughly 50% higher per pack, and the cavities are larger for the same capsule. [3]

Use it when: the formula is genuinely moisture- or light-sensitive, for example many probiotics and some botanicals.

Between the two sit coated films: PVC with a PVDC coating, or high-barrier PCTFE film (often known by the brand name Aclar), which raise the barrier of a transparent blister without going full foil. The film choice is matched to the product’s sensitivity and shelf-life target, and barrier data is part of the packaging spec.

How to choose

QuestionPoints toward
Is the formula moisture- or light-sensitive?HDPE or glass bottle with desiccant, or Alu-Alu blister
Does the customer need to see the product?PET bottle, or Alu-PVC blister
Is freight weight a real cost (e-commerce)?Stand-up pouch
Unit-dose convenience or compliance packaging?Blister
Premium positioning above all?Glass, or a printed pouch with a foil barrier
Lowest cost per unit at volume?HDPE bottle or pouch

How we pack it

White Bottle fills and packs all three formats in-house in Southern California: bottles and jars with induction seals, closures and desiccants; stand-up pouches and sachets; and seven blister lines for unit-dose formats. The packaging spec, including the barrier material, is documented for your program alongside the product spec. You own the brand. We make and pack it. See our blister packaging and facilities and capacity pages.

Common packaging questions

What is the difference between PET and HDPE bottles?

Both are rigid plastics. PET is clear and glossy with a good oil and solvent barrier and a fair water barrier; it is the material behind clear beverage-style bottles. HDPE is milky and opaque (sold as white or natural), with good impact strength and a better moisture barrier for the price; it is the standard supplement bottle. Most powder and capsule products ship in HDPE because it protects against light and moisture at the lowest cost.

Why would a supplement brand use a glass bottle?

Glass is essentially impermeable to gases and moisture and chemically inert, with a premium look and feel. The trade-offs are weight, breakage risk and freight cost, plus smaller closure and line-speed options. Brands choose glass when the positioning or the formula justifies it, not for everyday commodity products.

What is a stand-up pouch made of?

A stand-up pouch is a laminate: an outer layer that carries the print (often PET), a middle barrier layer (metallized PET or aluminum foil) and an inner sealant layer (often LLDPE) that heat-seals and touches the product. The barrier layer is what keeps moisture and oxygen out, and the layer stack is a specification you can ask for in writing.

What is the difference between Alu-PVC and Alu-Alu blisters?

Alu-PVC uses a thermoformed, transparent PVC cavity sealed with aluminum lidding: the capsule is visible and the cost is lower, with a moderate moisture barrier. Alu-Alu (cold-formed foil) uses an aluminum-based laminate on both sides: it is opaque and gives the highest barrier against moisture, oxygen and light, at roughly 50% higher cost per pack. Choose Alu-Alu when the formula is genuinely moisture- or light-sensitive.

Are there middle options between PVC and Alu-Alu blisters?

Yes. PVC coated with PVDC, and high-barrier films such as PCTFE (often known by the brand name Aclar), raise the moisture barrier of a transparent blister without going full cold-formed foil. The right film is matched to the product’s sensitivity and shelf-life target.

Do bottles need induction seals and desiccants?

Most supplement bottles carry an induction-sealed liner under the cap: it keeps the product sealed until the customer opens it and provides tamper evidence. A desiccant packet or canister goes inside when the formula is moisture-sensitive (many probiotics and botanicals are). Both are line items decided during the packaging spec.

Can White Bottle pack my product in bottles, pouches and blisters?

Yes. White Bottle fills and packs bottles and jars, stand-up pouches and sachets, and runs seven in-house blister lines in Southern California. Closures, induction seals, desiccants and labeling are part of the same project.

What do I need to bring to a first packaging conversation?

Your product form (powder, capsules, tablets), the look you want on shelf, any sensitivity you already know about (moisture, light, oxygen), a rough first-run quantity and your launch timing. A rough idea is enough to start.

Have a product to pack?

Tell us the format you are leaning toward, or ask which one fits your formula. A rough idea is a fine place to start, and a real person on our team replies within one business day.

Let’s chat about your project →
Sources and further reading
  1. TricorBraun: Types of Plastic Materials, a comprehensive guide (PET and HDPE properties)
  2. TricorBraun: Packaging definitions and terms (induction sealing, closures, components)
  3. Sepha: Is an Alu-Alu blister the best choice for your product? (cold-form structure and cost)
  4. White Bottle: Blister packaging
  5. White Bottle manufacturer FAQ

Reviewed October 14, 2026. This page is packaging education for brand founders. Material behavior depends on the exact resin, film and structure; project specs are confirmed in writing for the actual product.