Skip to content
White Bottle · Hydration

Electrolytes, explained: the minerals, the ratios and how a hydration brand gets made

You are thinking about launching an electrolyte or hydration powder. Before you pick a flavor or a stick pack, it helps to know what you are actually buying. Here is a plain-language guide to the ingredients, from the team that blends, fills and packages them.

For U.S. dietary-supplement projects · More founder guides

The short answer: an electrolyte powder is a small set of mineral salts (sodium, potassium, often magnesium and calcium) plus a sweetener system and flavor. The product decisions are the mineral forms, the exact milligrams per serving of each mineral (the ratio), sugar or no sugar, and the package. Every line is a spec with a COA behind it.

The minerals

Electrolyte blends are built from a handful of mineral salts. The form you pick changes taste, solubility and cost.

The anchor

1. Sodium

The mineral that defines most electrolyte products, delivered as sodium chloride (table salt), sodium citrate or a blend of both. Chloride is strongly salty; citrate is milder and slightly tart. Products range from under 100 to over 1,000 milligrams of sodium per serving.

What it means for your product: the sodium level and salt split set the taste ceiling. Bench samples decide how much saltiness your flavor can carry.

The partner

2. Potassium

Usually potassium chloride or potassium citrate. Potassium chloride has a distinct bitter-metallic edge at higher amounts, which caps how much a flavored mix can comfortably carry.

What it means for your product: the potassium-to-sodium balance is a taste problem as much as a numbers problem. Taste it before you lock it.

The support

3. Magnesium and calcium

Often included in smaller amounts, each in a chosen form (for magnesium: citrate, glycinate or malate; for calcium: citrate or carbonate). Form choice changes solubility and taste just like it does in single-ingredient products.

What it means for your product: small amounts, real spec decisions. Each mineral and form gets its own line on the spec sheet.

Ingredient twist

4. Coconut water powder

Dried coconut water, used in some mixes for its natural potassium and positioning. Composition varies by supplier and grade, so it needs a spec and COA like any other ingredient.

What it means for your product: a positioning ingredient, not a shortcut around mineral specs. The declared minerals per serving still come from tested values.

Side-by-side comparison

IngredientCommon formsTaste notesAsk the supplier
SodiumSodium chloride, sodium citrateSalty; citrate milder and tartSodium assay, grade, COA per lot
PotassiumPotassium chloride, potassium citrateBitter-metallic edge at higher amountsPotassium assay, grade, taste samples
MagnesiumCitrate, glycinate, malateForm-dependent; some bitter notesElemental yield, solubility, assay
CalciumCitrate, carbonateCarbonate is chalky; citrate cleanerElemental yield, particle size
Coconut water powderSpray-dried powderMild, slightly sweetComposition, potassium and sugar content, COA

Taste descriptions are general. Final flavor depends on the supplier materials, the levels and your full flavor system.

The sweetener decision

Sugar or no sugar changes the product more than any other single choice:

  • Sugar-sweetened: familiar taste and mouthfeel, and glucose-based sugars appear in traditional oral rehydration formulas. Adds calories and carbs to the panel.
  • Sugar-free: sweetened with stevia or monk fruit, or unsweetened. Changes the taste build and the label, and sweetener grade matters a lot at these levels.
  • Either way: the sweetener system is worked out with bench samples against the salt level, because salt and sweetness balance each other.

Specs and documents to ask for

Every mineral and sweetener needs its own paperwork. A complete electrolyte brief usually covers:

  • Mineral forms and amounts: exact milligrams per serving of sodium, potassium and any other minerals, with the salt or chelate named.
  • Certificate of analysis (COA): per lot for each ingredient, including assay, heavy metals and microbiological results.
  • Specification sheets: the limits each material has to meet, including particle size for blend uniformity.
  • Sweetener and flavor specs: grades, suppliers and amounts.
  • Finished-product test plan: how each mineral per serving will be confirmed on the finished blend.
  • Label declaration: how the minerals appear in the Supplement Facts panel, confirmed during label review. Supplement Facts rules are in 21 CFR 101.36. [2]

U.S. cGMP rules for dietary supplements (21 CFR Part 111) require a manufacturer to verify the identity of each dietary ingredient and to establish and meet component specifications. A COA is part of that picture, not a substitute for it. [1]

Spec first. The mineral forms, ratio, sweetener system and flavor for your product are selected, documented and approved for your program before anything is quoted.

Formats and packaging

Electrolyte products live in powder formats.

  • Stick packs: the category favorite for single servings, and we fill them.
  • Jars, bottles and pouches: multi-serving formats, with fill weight, scoop and density deciding the right size.
  • Samples: bench samples come before production, because the salt-sweet-flavor balance has to be tasted, not guessed.

For the manufacturing details, see powder manufacturing. If hydration is the concept for your next brand, our hydration brand page walks through how a project starts.

How we make it

White Bottle is a U.S. manufacturer. Our two Southern California facilities cover 102,000 square feet, with powder blending, filling and packaging in-house. Our team reviews the formula and specification with you, qualifies each material, runs the blend and fill, and tests to the specification you approve. You own the brand. We make it. See our facilities and capacity.

Common electrolyte questions

What is an electrolyte powder made of?

The core is a small set of mineral salts: sodium (usually from sodium chloride or sodium citrate), potassium (potassium chloride or citrate) and often magnesium and calcium in chosen forms. Around that sits the sweetener system (sugar, stevia, monk fruit or none), flavor and sometimes acids for taste. Every line is a spec decision: the mineral, its form and its amount per serving.

What is the difference between sodium chloride and sodium citrate?

Both deliver sodium, but they taste and behave differently. Sodium chloride is table salt: strongly salty. Sodium citrate tastes milder and slightly tart, and citrate salts also act as buffers in the blend. Many drink mixes use both so the saltiness stays drinkable at the target sodium level. The split is a formulation decision made with bench samples.

Do hydration powders need sugar?

No. Sugar-free electrolyte mixes are common, sweetened with stevia, monk fruit or nothing at all. Sugar changes taste, mouthfeel and the Nutrition Facts panel, and glucose-based sugars are also part of some traditional oral rehydration formulas. Either direction is legitimate; it changes the sweetener spec and the label, so decide it in the brief.

What is an electrolyte ratio?

The ratio is simply how much sodium, potassium and other minerals each serving carries relative to each other. There is no single correct ratio; products range widely, from low-sodium daily mixes to high-sodium mixes aimed at heavy sweaters. Your ratio is a product decision that goes in the spec as exact milligrams per serving per mineral.

What is coconut water powder?

Coconut water dried into powder, used as an ingredient in some drink mixes. It naturally carries potassium and sugars, and its composition varies by supplier and grade, so it needs the same treatment as any ingredient: spec sheet, COA per lot and a declared amount per serving on your label.

What documents come with electrolyte ingredients?

A spec sheet and COA per lot for each mineral salt (assay, heavy metals, micro), the sweetener and flavor specs, and the finished-product test plan that confirms each mineral per serving. Under U.S. cGMP rules (21 CFR Part 111), a manufacturer must verify the identity of each dietary ingredient it uses.

Can White Bottle make an electrolyte drink mix?

Yes, for qualified projects. White Bottle is a U.S. manufacturer in Southern California that blends, fills and packages powder products in jars, bottles, pouches and stick packs. The minerals, ratio and sweetener system are confirmed and documented for each project.

What do I need to bring to a first conversation?

Your concept, the mineral targets or ratio you have in mind (or an open question about them), the sweetener direction, the package you picture, a rough first-run quantity and your launch timing. A rough idea is enough to start.

Have a hydration idea?

Tell us the mineral targets you are leaning toward, or ask which direction fits. A rough idea is a fine place to start, and a real person on our team replies within one business day.

Let’s chat about your project →
Sources and further reading
  1. eCFR, 21 CFR 111.75: What must you do to determine whether specifications are met?
  2. eCFR, 21 CFR 101.36: Nutrition labeling of dietary supplements
  3. NIH Office of Dietary Supplements: Magnesium fact sheet (elemental forms reference)
  4. White Bottle manufacturer FAQ

Reviewed October 14, 2026. This page is ingredient education for brand founders. It makes no statement about what any mineral does for the body. Project terms and current regulatory requirements must be checked for the actual product.